The Shocking Truth About How Much Oil Fits in a Tank of Gas — What You Don’t Know Will Surprise You

When it comes to fuel, many people assume that the capacity of their car’s gas tank—typically measured in gallons—directly correlates with how much crude oil or gasoline it contains. But the truth is surprising, full of misconceptions, and rooted in fundamental differences between these two substances. In this article, we uncover the shocking facts about volume, density, and storage—and why you’re not piling oil into your gas tank (and never should be!).


Understanding the Context

The Simple Answer: Not as Much as You Think

You may believe that a 15-gallon gas tank holds 15 gallons of gasoline. In theory, yes—but here’s the critical difference: gasoline and crude oil are not directly interchangeable in terms of volume, even in the same tank.

One gallon of gasoline occupies approximately 4.4 liters, but 15 gallons of gasoline fill only about 66 liters of tank space. Now compare that to crude oil: crude is denser and heavier, with a density around 850 kg/m³ (roughly 10.4 liters per gallon by weight), which means liquid crude takes up less volume than the same weight of gasoline in a tank.

But here’s where the “shocking” part happens: you can never fill a tank with crude oil instead of gasoline in the same tank configuration. Gasoline and crude oil behave differently under pressure, evaporation rates, and engine requirements—let alone safety standards.

Key Insights


Why Oil Doesn’t Fit Like Gasoline in Your Car Tank

Your engine is optimized for gasoline—not crude oil. Here’s why mismatching fuels is dangerous, not just impractical:

  1. Chemical Properties Differ Drastically
    Gasoline is a light, volatile blend designed to ignite quickly and burn cleanly in internal combustion engines. Crude oil is thick, viscous, and contains heavy hydrocarbons that won’t vaporize properly under normal conditions. Modifying a gas tank to hold oil would cause fuel system clogs, poor combustion, and engine damage.

  2. Tank Design Limits For Gasoline Only
    Gasoline tanks are vented and designed with pressure relief mechanisms specifically for gasoline’s flammable vapors. Crude oil’s viscosity and density risk flooding the lines, blocking filters, or damaging seals.

Final Thoughts

  1. Legal and Safety Regulations Block It
    National and local laws forbid using crude oil in light-duty vehicles. Emergency responders and industrial fleets use specialized tanks, and most jurisdictions classify crude as hazardous material requiring certified storage.

The Numbers That Reveal the Truth

Let’s break down the volume differences with real-world figures:

| Substance | 1 Gallon Volume | 15 Gallons equivalent volume | Notes |
|-------------|-----------------|-------------------------------|-------|
| Gasoline | 4.4 liters | ~66 liters | Standard auto fuel concentration (~87 octane) |
| Crude Oil | 10.4 liters | ~165 liters | Higher density → less volume per mass unit |
| Available in tank| — | Limited by tank shape and material safety | Actual usable fuel volume lower than max cubic feet |

Even if you attempted to fill a gas tank with crude (which you shouldn’t), the tank capacity wouldn’t equate to the volume in gallons. Crude takes up less space in the same tank due to its density—meaning your drinkable gasoline volume is far smaller than the tank’s total liquid capacity.


Why This Misconception Persists

Many myths endure because of textbook oversimplifications: “1 gallon = 1 gallon,” no matter the substance. But real-world expectations diverge because:

  • The focus is usually on volume (tank size), not mass energy content.
    - Crude oil is not stored in consumer gas tanks—only in vast industrial tanks or pipelines.
    - Media often simplifies fuel biology, linking tank size directly to fuel type without technical nuance.