Ibirdie Outdoor TV Cover Installation Guide

Transform your outdoor space into a vibrant entertainment hub with the iBirdie Outdoor TV Cover. This weatherproof enclosure ensures your television stays protected and functional, rain or shine. Installing the iBirdie Outdoor TV Cover is a breeze, and we've got you covered with these step-by-step instructions.

Before you begin, make sure you have all the necessary tools and components at hand. Your iBirdie Outdoor TV Cover package includes the cover, a bracket, screws, and anchors. You'll also need a drill, a screwdriver, and a tape measure. Let's dive into the installation process.

Preparation and Measurement

Proper preparation is key to a successful installation. Begin by planning where you want to place your television. Ensure the area is level, stable, and sheltered from direct sunlight or strong winds.

Measure your television's width, height, and depth to ensure it fits snugly within the iBirdie Outdoor TV Cover. The cover accommodates screens ranging from 49" to 75" in size.

Wall or Stand Installation

Choose whether you want to mount your TV on the wall or place it on a stand. Both methods require careful measurement and proper installation of the bracket.

For wall installation, mark the location of the bracket on your wall using the measurements you've taken. Use a level to ensure the line is straight. For stand installation, measure and mark the location accordingly, ensuring your stand is sturdy and level.

Installing the Bracket

Drill pilot holes into the wall or stand using a suitable drill bit. The diameter of the drill bit should match the size of your screws. Ensure the holes are straight and the correct depth to accommodate the screws and anchors.

Install the bracket using the appropriate screws and anchors. Tighten them securely but avoid over-tightening, as this could strip the threads or crack the wall or stand. Once the bracket is securely in place, proceed to the next step.

Installing the iBirdie Outdoor TV Cover

With the bracket securely in place, it's time to install the iBirdie Outdoor TV Cover. Start by unfolding the cover and aligning it with the bracket. Ensure the cover's bottom and sides are flush with the wall or stand.

Using the provided screws, attach the cover to the bracket. Start with the top corners, then work your way down to ensure the cover is evenly secured. Tighten the screws firmly but avoid over-tightening to prevent stripping.

Securing the Cover

Once the cover is securely attached to the bracket, it's time to ensure it's firmly attached to the wall or stand. Use the provided screws to attach the cover's side panels. This will prevent the cover from swaying or moving during windy conditions.

Check that all screws are tightened evenly and that the cover is flush with the wall or stand. Ensure the cover's drain holes are facing downwards to facilitate water drainage. Lastly, check that the cover's door opens and closes smoothly and securely.

Final Touches

With the iBirdie Outdoor TV Cover securely installed, it's time to run your television's cables through the provided cable management holes. Ensure all cables are properly secured and routed to prevent any accidental tugging or damage.

Power up your television and test its functionality. The iBirdie Outdoor TV Cover is designed to maintain a cool internal temperature, so you shouldn't notice any significant difference in performance compared to an indoor television.

Congratulations! You've successfully installed the iBirdie Outdoor TV Cover. Enjoy your outdoor entertainment space, rain or shine, knowing your television is protected by this durable and stylish enclosure. Don't forget to regularly inspect the cover for any signs of wear and tear, and clean it as needed to maintain its functionality and appearance.